浙江星锋智能设备有限公司 中文版 ENGLISH
 
您当前的位置:首页  > 全自动智能裱贴机 > 全自动高速裱贴机
产品名称:   全自动高速裱贴机
产品介绍
一、 性能特点
Features
 
CF1450L纸机,用于印刷包装行业中卡纸对卡纸、卡纸对瓦楞纸的对裱。适用瓦楞纸有A、B、C、D、E、F、N楞,三层、五层、七层均可正常工作,裱出的纸张平整度好,精确度高。 
For the mounting of cardboard on the cardboard, and cardboard on the corrugated in the printing and packaging industry. Applicable corrugated paper are  A, B, C, D, E, F, N flute, and can work properly on three, five, seven layers, mounted paper has good flatness and precision.

 
全机主要零部件采用国内外知名厂家原装产品,寿命长,稳定性好。电气部分采用三菱、施耐德的接触器、西门子按钮开关等,保证了整机的性能稳定。
The main parts of the whole machine adopts the original products of domestic and foreign well-known manufacturers, with long durability and good stability. Electrical parts are of Mitsubishi, Schneider contactor, button switch of Siemens, to ensure that the machine's performance and stability.
 
 
 
二、 局部说明
Partial Description
 
1.面纸给纸部:采用台湾四吸四送独特设计的给纸头,吸气有力,给纸顺畅,平稳准确。
1.Surface Paper Forwarding Section: Taiwan “four suction four forwarding” unique design of the paper forwarding head, has strong suction, smooth paper forwarding, accurate operation.


2.人机界面:本机采用7寸高分辨率人机界面进行人机交流,可对机器的运行状态进行实时动态监测显示,使机器调整和故障排除方便快捷,安全可靠(可选配)。
 
2. Artificial Interface: The machine adopts 7-inch high-resolution man-machine interface for human-computer interaction, the machine running status of real-time dynamic monitoring display, the machine adjustment and troubleshooting is convenient, fully reliable (optional).
 
3.齐纸对位系统:独特的同步推爪设计可将面纸和底纸同时进入贴合部,并能在机器运转中实现上下纸张的微调。
3. The Paper Alignment System: An unique synchronization pawl design can be at the same time into the tissue paper and the end of the Department of paste, and can run the machine to achieve fine-tuning of the upper and lower paper.


4.底部给纸:采用进口的打孔皮带吸风送纸机构,吸力强劲,输纸平稳。使用纸张:250g/㎡以上卡纸和A,B,C,D,E,F,N楞以及三层,五层,七层纸板,高速输纸顺畅准确。
 
4. Base Paper Forwarding: The use of imported perforated belt suction feed mechanism, suction strong, smooth feeding. Paper: 250g / ㎡ cardboard and A, B, C, D, E, F, N and three-story, five, seven cardboard, high-speed paper feeding smooth and accurate.
 
5.电器部:整机采用PLC程序控制,变频调速器。各种电器元件,检测开关均采用日本、德国、台湾等公司名牌产品。运行控制精确,性能稳定,安全性强。
 
5. Electrical Section: The whole machine with PLC program control, frequency converter. All kinds of electrical components, detection switches are used in Japan, Germany, Taiwan and other brand-name companies. Accurate operation control, stable performance, and strong safety.


6.面纸输送部:独到的结构设计,采用全新柔软材质的PU耐磨胶太阳轮配合皮带进行输纸,使输纸平稳,顺畅。不会对印刷纸张的表面造成磨损。对于不同厚度的纸张适应性强。
6. Surface Paper Delivery Section: Unique structural design, a new soft material PU wear-resistant plastic sun belt with the belt for paper, so that smooth feeding, smooth. Does not cause wear on the surface of the printing paper, for different thickness of the paper adaptability.
 
7.底纸输送部:独特的同步推爪送纸结构,可实现250g/以上卡纸和A,B,C,D,E,F,N楞及三层,五层,七层瓦楞纸板的顺畅,准确输送。
7. Base Paper Delivery Section: The unique synchronous push claw feed structure, can achieve more than 250g / cardboard and A, B, C, D, E, F, N and three, five, seven corrugated Smooth, accurate delivery. 
 
8.进口相位调整系统:采用日本原装精密相位调整器,在机器高速运转过程中可实现贴合误差的调整,准确无误,大大提高生产效率。
8. Imported Phase Adjustment System: The Japanese original precision phase adjuster, the machine can be achieved during high-speed operation of the fit error adjustment, accurate, greatly improving production efficiency.


9.传动系统:采用进口轴承、同步带作为传动部件,柔软、强韧、耐久、耐磨损、耐拉、耐热。与同步带轮保证同步精度,并配合日本链条带动的同步推爪和完美的调整系统以及侧板的对齐结构,可将贴合误差控制在±1.5㎜之内,又能减少纸张的损坏率。
9. The Transmission System: The use of imported bearings, timing belt as a transmission parts, soft, tough, durable, wear-resistant, resistant to heat, heat. And synchronous pulley to ensure synchronization accuracy, and with the Japanese chain driven synchronous pawl and perfect adjustment system and the side of the alignment structure, the fit error can be controlled within ± 1.5 mm, but also reduce the rate of damage to the paper.


10.上胶、涂胶系统:全自动的胶水补充系统,在贴合过程中由电控流体控制器自动检测和补充胶水胶量。根据纸张的不同要求可自由调节胶水涂层的厚度,使涂胶更均匀。并配合胶水回收循环使用,节省胶水,避免浪费。又解决了胶水涂布甩胶问题,使裱出的纸张平整、精确。
采用独特的加工技术(网纹辊设计),在涂胶过程中,使每个网格都均匀的粘附胶水,从而解决卡纸与卡纸对裱上胶难的问题。
10.Gluing System: Automatic glue to add the system, in the bonding process by the automatic control of fluid control and automatic detection of glue glue volume. According to the different requirements of the paper can be freely adjusted the thickness of the glue coating to make the coating more uniform. And with the glue recycling recycling, saving glue to avoid waste. But also to solve the glue coating rejection glue problem, so that the paper out of the formation of flat, accurate.
It adopts the unique processing technology (anilox roller design), in the coating process, so that each mesh are evenly adhesive glue, paper and cardboard to solve the problem of mounting plastic on the difficult.

三、 整机主要电气元件配置
Main Electrical Configurations


四、主要技术参数
Main Technical Parameter

注:因产品不断改进,技术配置、数据会有所变化,以操作说明书为准.
Note: due to the continuous improvement of products, the technical configuration and data will change, and the operation manual shall prevail.

相关产品: ■全自动高速裱贴机(前规机)   ■全自动高速裱贴机(伺服机)  
 
服务中心 合作客户 产品中心 新闻动态 关于星锋 后台管理登录