浙江星锋智能设备有限公司 中文版 ENGLISH
 
您当前的位置:首页  > 全自动智能裱卡机 > 全自动高速裱卡机CF-1150B
产品名称:   全自动高速裱卡机CF-1150B
产品介绍

CF系列全自动高速裱卡机

配置说明

( KD-800  CF-1150A/1150C/1210/1300/1450 )

CF Series FULLY AUTOMATIC HIGH-SPEED CARDBOARD LAMINATOR



 


一、 机器主要功能

Main Functions

 

CF系列全自动高速裱卡机是我公司结合国内外同类产品的优越性能研制开发的,适用于高档的酒盒、彩盒卡纸对裱的专用设备。本机可选配高速自动送纸、高精度调胶轮、自动追踪规位机、人机界面自动控制,可配不停机送纸。

CF series high-speed automatic cardboard laminator is a special cardboard aligning equipment combining with advantages of domestic and foreign similar products;it is suitable for high class wine box and graphic carton.The machine is equipped with high speed automatic paper feeder, auto tracking aligning of high precise adjusting glue roller ,automatic control of man-machine interface and nonstop paper collecting.




二、 性能特点

Features

1.送纸系统:(面纸、底纸)采用先进的四吸四送飞达送纸系统,每小时送纸可达10000张,吸嘴能自由伸缩≥30mm,能使变形、卷翘纸张方便调整,调整旋扭采用钢丝传动调整吸嘴的高度与倾斜角度。后2个吸嘴动作配合前面2个吸嘴使卷翘的纸张高低自由调整平稳输送到涂布机。(另可配备不停机送纸系统)正机装薄纸张可左右调动50mm使面纸、底纸、三角板贴合保持一条线的快速调机功能。

1. Paper Forwarding System: Feeding system: It adopt advanced four-suction and four- feeding paper feeder system (upper paper, bottom paper), paper feeding speed is up to 10000 pieces per hour, the suction nozzle can be stretched 30mm freely,adjust the rolled curled papers, uses steel wire transmission adjusting suction nozzle height and tilt angle, two suction nozzles act with three front suction nozzles to adjust the curled paper level freely and transmit to coating machine smoothly. (Paper feeding system is optional)




2、主机涂布系统:高精度涂布机构上胶轮与调胶轮的控制下,涂布量最低约可调至≤0.08mm,水份指标控制在7%-12%内,提高了产品的干燥度、挺度。自动液面控制:能依纸张需求精确调节涂胶量,确保涂胶均匀。方便的纸张分离器:能将纸张即时分离上胶轮,亦便于拆散、清洗与调校。精致的轮边档胶,能将轮组边的胶水刮回轮内,使高速运转的轮边不会溢胶,亦能调节胶水迅速回流,达到循环利用的目的。

2. COATING SYSTEM:Under control of high precision coating mechanism, the coating volume of gluing roller and glue adjusting roller can reach less than 0.08mm, moisture index can be controlled from 7% to12%, and it improves product dryness and stiffness. Automatic glue level control: accurately adjust coating volume required by different paper to ensure even gluing. Convenient paper separator: separate the paper from the gluing roller quickly and easy for dismantling, cleaning and calibration of the gluing roller, wipe the glue back to the roller to prevent roller ends at high speed from glue overflowing, and it can also adjust back flow to recycle the glue.




3、主机输送系统:利用输送快于规挡的速度差,将纸追抵前规挡,侧方以同步方与侧挡规定位,(面纸与底纸)两纸张即可行进中准确完成侧、前规位。

3. The Host Delivery System: The speed difference between faster paper delivering and front stopper moving advances the paper to reach the front stopper ,and the paper sides are aligned synchronously(upper paper and base paper with side stoppers to ensure upper and lower paper being aligned and laminated perfectly at side and front.





4、加压输送系统:压纸速度与压纸长度电动调校,尺寸转换方便,可将贴合完成的纸张,重叠压着,亦可加快转速将纸张分别压着;新增加压轮组,能将分别压着过的薄纸贴合成品二度重压,使产品更加平整精美。

4. The Pressure Transmission System: the pressure of paper speed and paper length of the electrical adjustment, easy size conversion, the paper can be laminated to complete, overlapping pressing, but also speed up the paper were pressed; , Can be pressed over the thin paper paste finished second degree of weight, make the product more smooth and beautiful.

 

 5、收纸系统:抖松式收纸机,能将重叠压着纸张抖松后推挤,确保整齐顺畅的收纸,自动齐纸装置,使收纸整齐。通过光电开关检测自动收纸抖松式收纸机,能将重叠压着纸张抖松后推挤,确保整齐顺畅,增加工作效率,减少人工操作。(可配备不停机收纸系统)

5. The Delivery System: shaking loose-type delivery machine, can overlap the crimping of the paper after shaking to ensure that the neat and smooth delivery of paper, automatic paper-aligning device, so that the neat paper. Through the photoelectric switch to detect the automatic collection of paper-shaking loose-type delivery, can overlap the pressure of the paper after the shaking loose to ensure that neat and smooth, increase efficiency and reduce manual. (Can be equipped with non-stop delivery system




6、整机控制系统:采用日本三菱PLC电脑程序控制,人机界面触摸屏,可对机器的运行状态进行实时态监测显示,机器调整和排除故障方便快捷。

6. Control System: Control system: use PLC computer program control, computer display, man-machine interface touch screen, monitor display for machine running in real time. Conveniently adjust and debug the machine



7、整机传动系统:全机采用进口时规皮带传动,动力传动均匀分配,高精度、免保养、低噪音、高效率。

7. Drive System: Drive system: The system allows smooth and even distribution in power drive by a complete set of imported timer belts. Free maintenance, low noise and high efficiency.



8. 调整系统:业内首创伺服自动追踪与日本原装精密相位调整器紧密配合,在机器高速运转过程中可实现 ±0.5mm 内的误差调整,大大提高生产效率。

8. Adjustment System:Domestically creates the first automatic tracking servo system and it matches Japanese precise regulator completely, which can achieve ±0.5mm error adjustment in high speed and improve productivity efficiency greatly.




三、 整机主要电气元件配置

Main Electrical Configurations


四、主要技术参数

Main Technical Parameter


注:因产品不断改进,技术配置、数据会有所变化,以操作说明书为准.

Note: due to the continuous improvement of products, the technical configuration and data will change, and the operation manual shall prevail.

相关产品: ■CF系列全自动高速裱卡机  
 
服务中心 合作客户 产品中心 新闻动态 关于星锋 后台管理登录